[. . . ] Insert the box from above into the open slot such that both hooks engage in the wall panels (see Fig. IMPORTANT Do not use abrasive or aggressive cleaning agents, these could damage the plastic parts. [. . . ] Draw a straight line on the wall so as to align the wall panels with it (see Fig. Hold the wall panels against the wall and, using a pointed object, mark the boreholes through the screw positions. Screw the wall panels to the wall with at least 10 screws each (see Fig. The storage set is intended exclusively for the storage of tools and small parts such as nails, wallplugs, screws or similar items, in private households. This storage set is not intended for the storage of flammable, toxic or corrosive liquids. If you do not, the wallplugs may not hold and the wall panels could fall off. Insert the drill and bit holder from above into the slots such that both hooks engage in the wall panel (see Fig. Insert the tool holder from above into the slots such that both hooks engage in the wall panel (see Fig. 1 For the ring and open-ended spanner holder you need two slots lying adjacent to each other and five slots one above the other. Insert the two ring and open-ended spanner holders from above into the slots such that both hooks engage in the wall panel (see Fig. [. . . ] Insert the two ring and open-ended spanner holders from above into the slots such that both hooks engage in the wall panel (see Fig. Maximum load per wall panel Maximum load - small box Maximum load - medium box Maximum load - large box 32 kg 1 kg 1. [. . . ]